Suggested Use; To trigger external relays or devices

# Digital Inputs - Eight
- Switch triggered - The digital inputs require only closing the inputs to the ground terminal via a switch, button, etc. No voltage should be used. The refresh rate is 125Hz for the Digital Input.

# Digital Outputs - Eight
- The digital outputs put out +5V when turned on and 0V when off. The Digital Outputs have a refresh rate of approximately 125Hz.

# Analog Inputs - Eight
- The analog inputs receive a voltage between 0 and +5V. The value is converted into a number in the code between 0 and 1000 respectively. The refresh rate on the Analog Input is 65 Hz. NOTE: You can pull 200-300mA from the Analog Inputs. If you exceed the limit, USB will turn off the Interfacekit and throw an error.

# Important Power Hub Notes
- A 2-Port USB hub is integrated in the 8/8/8. A power supply is only required for the operation of the 2 Port USB hub. We recommend a 6-12 VDC power supply capable of supplying at least 1000mA. The input jack is center positive polarity 5.5mm. The power supply output jack is center positive 2.1mm.

For control of individual lane power for up to eight lanes or eight devices - SlotTrak can control 8 of them. Suggested use is to control individual high power relays, see Slottrak.com's Hardware Page for pictures

All Phidget Cards include a 6-foot USB Cable.

Phidget Cards can be Mixed and Matched.